1. Working environment: Please keep the plastic container clean. A,
B components are strictly according to the weight ratio, accurately
weighed, and stirit evenly along the inner wall of the container
clockwise until it is used for 3-5 minutes.
2. According to the operating time and amount of glue deployment,
to avoid waste. When the temperature is lower than 15 ° C, please
pre-heat the A glue to 30 ° C and then adjust the rubber, easy to
operate (low temperature, A glue will thicken ); After use must
seal the lid,to avoid the product due to moisture absorption
scrapped.
3. When the relative humidity is more than 85%, the surface of the
cured product can easily absorb the moisture in the air to form a
whitemist.Therefore,when the relative humidity is more than 85%, it
is not suitable for room temperature curing. It is recommended to
use the heating and curing.
4. The lid must be sealed after use to avoid the product being
scrapped due to moisture absorption.
Note:
1. This product is a special large pouring glue for river tables.
It will dry slowly in the production of thin layers
2. low temperature will lead to slow curing or even stop curing,
low temperature environment application using high transparent low
temperature curing adhesive
3. the bonding surface should be dust removal, oil removal, keep
the surface clean and dry
4. the construction proportion must be accurate, improper
proportion will lead to the colloid does not cure or cure is
incomplete
5. AB glue must be kept sealed and pollution-free. After taking the
glue, the container cover should be tightened as soon as possible
to avoid dampness
6. When stirring, try to stir gently in one direction to avoid too
many bubbles. When pouring, it should also be soft and light
7. It is recommended to use a vacuum defoaming machine, which has
the best effect. Flame gun or hot air gun can only eliminate the
bubbles within 0.5cm of the surface
8. should be in the ventilated environment construction,
construction should wear gloves, masks, protective goggles and
other protective measures
9. Do not take it. If it gets into eyes or mouth by accident, rinse
immediately with plenty of water and seek medical advice
10. Use with caution if allergic to resin
11. the uncured glue can be cleaned with water and acetone. The
cured glue can only be removed by mechanical method. If it
accidentally contacts the skin, it can be cleaned with warm water
and washing powder.
How to Choose Product Model:
Aorun epoxy resin is suitable for machinery, petrochemical,
vehicle, electronic products, electrical equipment, construction,
decoration, special purpose and other industries, especially for
special purpose and multiple purposes.
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets
are normal size. Customized
